Skip to content
SPUR & STITCH

Boots

Dan Post boots: what they make and who they fit

The traditional mid-tier brand with the feature orthotic wearers actually need - a removable insole.

By Selena H. · Updated October 13, 2026

Spur & Stitch is reader-funded. As an Amazon Associate we earn from qualifying purchases - at no extra cost to you. Affiliate disclosure

Black leather western boots

We choose picks by comparing published specifications, construction, sizing guidance and aggregated owner feedback. We have not worn these boots ourselves. How we pick

Dan Post sits in the traditional middle of the market: classic shapes, stitched shafts, leather outsoles on the welted models, and one feature that quietly decides the purchase for a lot of people - a removable insole.

Why removable insoles matter more than they sound

If you wear a prescribed orthotic, or if the firm arch of a western boot does not suit your foot, a glued-in insole leaves you no options. Dan Post lists its Soft Strike removable orthotic insole on lines including the Milwaukee, which means you can take the factory footbed out and put your own in without losing the volume that causes heel slip. That is not a marketing feature; it is the difference between a boot being wearable and not.

The lines

LineWhat Dan Post listsBest for
MilwaukeeClassic western stitching, cowboy heel, Soft Strike removable orthotic insoleTraditional shapes, orthotic wearers
Renegade CSDistressed leather vamp, square toe, single-stitched welt over a leather outsole, full leather lining, Ultimate Flex insole, 13 in shaftA taller shaft and a forgiving finish
Youth (e.g. Majesty)Leather square toe youth bootsA child's first real leather boot

Dan Post sizing and shapes

Dan Post's lasts run more traditional - narrower and more upright - than the broad square mainstream. If square toes have felt clumsy on you, this is the brand to try. The flip side is that a wide foot will find the traditional shapes tight, in which case the square-toe models or a broader brand are the better route. The 13-inch Renegade shaft is tall enough to need a boot jack to remove comfortably.

Quick picks

Tap any row to jump to the full write-up. The price column goes straight to Amazon.

#ProductBest forPrice
1
Dan Post Dan Post Milwaukee - illustrative photo of boot brown, not the product itselfIllustrative photo
Dan Post MilwaukeeYou give up modern cushioning technology.
a classic stitched boot with an orthotic insole
2
Dan Post Dan Post Renegade CS - illustrative photo of boot brown, not the product itselfIllustrative photo
Dan Post Renegade CSYou give up easy entry.
a taller shaft and a distressed finish
3
Dan Post Dan Post Youth Majesty - illustrative photo of boot kids, not the product itselfIllustrative photo
Dan Post Youth MajestyYou give up cost efficiency.
a child's first real leather boot
4
Justin Boots Justin Bent Rail - illustrative photo of boot brown, not the product itselfIllustrative photo
Justin Bent RailYou give up wet-weather confidence and grip.
a first pair you can wear to a wedding

#ad - price checked on Amazon at the time you click. Last price check: October 13, 2026. How we are funded

Pick 1

Dan Post Milwaukee - best for a classic stitched boot with an orthotic insole

Dan Post Dan Post Milwaukee - illustrative photo of boot brown, not the product itselfIllustrative photo

The Milwaukee is the Dan Post boot most people mean when they say Dan Post: classic western stitching on the shaft, a cowboy heel, and the brand's Soft Strike removable orthotic insole. The removable insole is the practical reason to care. If you wear your own orthotic or need more arch support than a boot comes with, a removable footbed is the difference between a boot that works and a boot that sits in the closet - and most boots in this price band are glued in. Dan Post's shapes run more traditional than Ariat's, so if you have been looking at square toes and finding them clumsy, this is the alternative to try.

What you give up: You give up modern cushioning technology. This is a conventional boot with a good insole, not an engineered comfort system.

Good

  • Removable insole takes your own orthotic
  • Traditional lines
  • Well-known, easy to find

Less good

  • Cowboy heel needs more break-in
  • Less cushioning than sport lines
ToeTraditional / pointed and square options
InsoleSoft Strike removable orthotic
HeelCowboy heel
UpperLeather, western stitch pattern

Pick 2

Dan Post Renegade CS - best for a taller shaft and a distressed finish

Dan Post Dan Post Renegade CS - illustrative photo of boot brown, not the product itselfIllustrative photo

Dan Post lists the Renegade CS with a distressed leather vamp and stitched upper, a square toe with a western heel, a single-stitched welt over a Dan Post leather outsole, full leather lining with its Ultimate Flex insole, and a 13-inch shaft. The 13-inch shaft is the reason to pick it: a taller shaft keeps a bootcut jean sitting where it should instead of bunching at the ankle, and it is what makes a boot look deliberate rather than borrowed. The distressed finish also forgives the scuffs a first pair inevitably collects in month one, which is a real advantage when you are still learning not to kick doorframes.

What you give up: You give up easy entry. A 13-inch shaft takes more effort to get on and off, and a leather sole again means caution on wet tile.

Good

  • Tall shaft holds jeans properly
  • Distressed finish hides early scuffs
  • Resoleable welt

Less good

  • Harder to pull on
  • Leather sole is slick when new
ToeSquare
Shaft13 in (per Dan Post)
OutsoleLeather, single-stitched welt
LiningFull leather
InsoleUltimate Flex

Pick 3

Dan Post Youth Majesty - best for a child's first real leather boot

Dan Post Dan Post Youth Majesty - illustrative photo of boot kids, not the product itselfIllustrative photo

Kids' western boots divide into costume boots and small versions of real ones, and this is the second kind: a leather square-toe youth boot from an established western brand. For a growing foot that matters less for durability than for fit - a real leather boot breaks in to the child's foot shape instead of rubbing in the same spot for a season. Buy with a thumb's width of room at the toe and a thicker sock, and accept that a child in a growth spurt gets one good year out of any boot regardless of what you spend.

What you give up: You give up cost efficiency. A child will outgrow this before wearing it out, and a cheaper boot would have been outgrown just as fast.

Good

  • Real leather, not costume vinyl
  • Pull-on, no laces
  • Established brand sizing

Less good

  • Outgrown long before worn out
  • Costs more than a costume boot
ToeSquare
UpperLeather
SizingYouth
Fit tipA thumb's width at the toe, thicker sock

Pick 4

Justin Bent Rail - best for a first pair you can wear to a wedding

Justin Boots Justin Bent Rail - illustrative photo of boot brown, not the product itselfIllustrative photo

Justin's Bent Rail collection is the answer to a question beginners ask constantly: which cowboy boot does not look like a work boot. Justin publishes a leather upper over a leather outsole with a double-stitched welt, an 11-inch boot height, a broad square toe and its J-Flex insole. The leather outsole is the part that matters for dressing up - it is thinner and quieter than rubber, it takes a shine, and it is why this boot reads as footwear rather than equipment. The broad square toe keeps it comfortable despite that. Justin states the line is handcrafted in the USA with globally sourced materials, which is unusual at this price.

What you give up: You give up wet-weather confidence and grip. A leather sole is slick on tile and wet pavement until it wears in, and it is not what you want for a muddy field.

Good

  • Dressy leather sole at a mid price
  • Broad square toe is roomy
  • Resoleable welt

Less good

  • Slick on smooth and wet surfaces
  • Leather sole needs protecting
ToeBroad square
Height11 in (per Justin)
OutsoleLeather, double-stitched welt
InsoleJ-Flex Flexible Comfort System
MadeUSA with globally sourced materials

#ad - price checked on Amazon at the time you click. Last price check: October 13, 2026. How we are funded

Common questions

Are Dan Post boots good?

Yes - they sit in the traditional mid-tier with stitched leather uppers, welted models with leather outsoles, and the practical advantage of removable insoles on several lines.

Do Dan Post boots have removable insoles?

Several lines do, including the Milwaukee with its Soft Strike removable orthotic insole. That makes the brand a good starting point if you wear a prescribed orthotic.

Do Dan Post boots run narrow?

Their traditional lasts are narrower and more upright than the broad square mainstream, so a wide foot will usually prefer the square toe models or a brand such as Ariat's wide square lines.

What is the Dan Post Renegade CS?

A distressed-leather square toe boot that Dan Post lists with a single-stitched welt over a leather outsole, full leather lining, its Ultimate Flex insole and a 13-inch shaft.

Dan Post or Justin?

Justin for a dressier broad square toe and leather sole; Dan Post for traditional narrower shapes and a removable orthotic insole. They overlap heavily on price and quality - the fit of the last should decide it.

Sources

About the author

Selena H.

Selena H. is the owner and editor of Spur & Stitch. She started the site after discovering how much western-boot buying advice assumes you already know what a welt is. Every guide here is written for the person buying their first pair.

More about this site

Read next

Black leather western boots

Boots

Justin vs Dan Post

Two traditional mid-tier brands compared on last shape, insoles, shaft height and sole.

← All boots guides